|
|||||||||||||
| The UnicoderTM ME-210 Intelligent
Magnetic Encoder includes both incremental and absolute positioning capability,
accessed via I2C and/or incremental outputs. Cable sold separately. Now available for purchase (as of May 15, 2009). |
||||||||||
| The UnicoderTM ME-110 Magnetic Encoder includes
both incremental and absolute positioning capability, accessed via an SPI-like
interface and/or incremental outputs. Now available for purchase (as of May 15, 2009). |
||||||||||
| One wheel: includes materials to assemble
one WheelWatcherTM encoder, an alignment tool, and an instruction booklet.
Servo and wheel not included. |
Two wheels: includes materials to assemble
two WheelWatcherTM encoders, an alignment tool, and an instruction
booklet. Servos and wheels not included. |
|||||||||
WheelWatcherTM
WW-02 Encoder |
One motor: Similar to the WW-01 encoder,
the WW-02 is designed for use with Solarbotics gearhead motors. Motor &
wheel not included. |
Two motors: includes materials to assemble
two WheelWatcherTM encoders. Motors and wheels not included. |
||||||||
WheelCommanderTM
WC-132 Controller![]() |
The WheelCommanderTM
controller takes the burden of complex feedback control firmware off of
the main robot controller. It provides powerful closed-loop control using
simple RS-232 or I2C interface commands. Servos not included. WheelWatcher
encoders sold separately. |
|||||||||
| Need an extra sticker for another wheel? This
preprinted 32 stripe self-adhesive codewheel is designed for use with the
WW-01 and WW-02. |
||||||||||
Codewheel
Spacer CS-040![]() |
Codewheel mounting system for WheelWatcher CW-32 codewheel stickers used with the WW-01. |
|||||||||
Codewheel
Spacer CS-100![]() |
Codewheel mounting system for WheelWatcher CW-32 codewheel stickers used with the WW-02. |
|||||||||
|
|
Nubotics and other fine robotics products are
also available at:
|
|||||||||
©2004-2009 Noetic Design, Inc. All Rights Reserved. Nubotics, Unicoder, WheelWatcher, and WheelCommander are trademarks of Noetic Design, Inc.