|
|||||||||||||
| One wheel: includes materials to assemble
one WheelWatcher encoder, an alignment tool, and an instruction booklet.
Servo and wheel not included. Discontinued; see WW-11 below. |
Two wheels: includes materials to assemble
two WheelWatcher encoders, an alignment tool, and an instruction
booklet. Servos and wheels not included. Discontinued: see WW-11 below. |
|||||||||
| One wheel: includes materials to assemble
one WheelWatcher encoder, an alignment tool, and an instruction booklet.
Servo and wheel not included. |
Two wheels: includes materials to assemble
two WheelWatcher encoders, an alignment tool, and an instruction
booklet. Servos and wheels not included. |
|||||||||
WheelWatcher
WW-02 Encoder |
One motor: Similar to the WW-01 encoder,
the WW-02 is designed for use with Solarbotics gearhead motors. Motor &
wheel not included. |
Two motors: includes materials to assemble
two WheelWatcher encoders. Motors and wheels not included. |
||||||||
| Need an extra sticker for another wheel? This
preprinted 32 stripe self-adhesive codewheel is designed for use with the
WW-01 and WW-02. |
||||||||||
WheelCommander
WC-132![]() |
The WheelCommanderTM controller
takes the burden of complex feedback control firmware off of the main robot controller.
It provides powerful closed-loop control using simple RS-232 or I2C interface
commands. Servos not included. WheelWatcher encoders sold separately. |
|||||||||
Codewheel
Spacer CS-040![]() |
Codewheel mounting system for WheelWatcher CW-32 codewheel stickers used with the WW-01. |
|||||||||
Codewheel
Spacer CS-100![]() |
Codewheel mounting system for WheelWatcher CW-32 codewheel stickers used with the WW-02. |
|||||||||
|
|
Nubotics and other fine robotics products are
also available at:
|
|||||||||
©2004-2010 Noetic Design, Inc. All Rights Reserved. Nubotics, WheelWatcher and WheelCommander are trademarks of Noetic Design, Inc.